970-945-7777

  

 

 


Dana 60 Rebuild Parts

All parts are for kingpin Dana 60 front axles.  Part numbers listed are for GM front axles unless noted otherwise.  Parts for GM Ford, and Dodge axles are available even if they aren't listed, call for more info. 

Most GM, Ford, and Dodge D60 front axles use the same outer rebuild parts. There are variations in the spindles, knuckles, brakes and axle shafts but they're very similar in the kingpins, wheel bearings, u-joints, seals, etc.

All GM D60 front axles were kingpin style.

Ford front axles used kingpins until sometime in 1992, then they used ball joints.  1993-97 Ford Dana 60's use the same wheel bearings, u-joints, spindle seals/bearings, etc as any kingpin Dana 60.

Dodge D60's used kingpins through 1993, then switched to ball joints.  Early Dodge D60's used an external spline (bolt on type) locking hub but can be converted using our single wheel bearing hubs.

If you don't see a buy now button, call us at 970-945-7777


We also carry parts to upgrade pretty much any part of your D60, click here
 

  Part Number Description Application Price  
GU5109 Timken wheel bearing kit All GM Dana 60

'93 and older Dodge D60

'97 and older Ford D60

$49/side Buy Now
GU5105 Kingpin spring and bushing kit

Does both sides, replacement springs, bushings and washers for the top of the knuckle

All GM Dana 60

'93 and older Dodge D60

'91 and older Ford D60

$39/set Buy Now
GU5124 Standard kingpin rebuild kit, one side only.  This kit includes the most common parts that need replacement, includes lower bearing/race, lower seal, upper spring/bushing/washer and seal.  Gaskets not included as we use silicone but are available on request. All GM Dana 60

'93 and older Dodge D60

'91 and older Ford D60

$79/side Buy Now
  Part Number Description Application Price  


 
GU5123 Master kingpin rebuild kit, everything to rebuild the kingpins except the lower plate (available separately) All GM Dana 60

'93 and older Dodge D60

'91 and older Ford D60

$114/side Buy Now
GU5125 Dana 60 upper kingpin cap All GM Dana 60

'93 and older Dodge D60

'91 and older Ford D60

$15/each Buy Now
GU5126 Dana 60 Lower Kingpin Cap All GM Dana 60

'93 and older Dodge D60

'91 and older Ford D60

$38/each Buy Now

 

  Part Number Description Application Notes Price  
GU5119 Spindle All GM Dana 60

'93 and Older Dodge D60

Spindle bearing and seals included $198/each Buy Now
GU5120 Spindle '77.5-'79 & '85-'91 Kingpin Style
Ford D60
Spindle bearing and seals included $210/each Buy Now
GU5121 Spindle '92-'97 Balljoint Style Ford D60 Spindle bearing and seals included $198/each Buy Now
GU5108 Spindle Nuts All GM Dana 60

'93 and older Dodge D60

'97 and older Ford D60

OEM pin and plate style $22/side Buy Now
  Part Number Description Application Notes Price  
GU5122 Spindle Seal and Bearing Kit  

All GM Dana 60

'93 and older Dodge D60

'97 and older Ford D60

Includes spindle lip seals and spindle needle bearing $31/side Buy Now
GU5127 D60 Spindle stud/nut kit  

All GM Dana 60

'93 and older Dodge D60

Includes 6 studs/nuts for one side $24/six
(one side)
Buy Now
GU5128 D60 Spindle stud/nut kit '97 and older Ford D60 Ford D60 Spindle stud/nut kit, includes 5 studs/nuts for one side $20/five
(one side)
Buy Now


Part Number
Description
Brand
Price
 
GU5133

Front D60 Differential re-bearing kit

Fits open knuckle GM, Dodge and Ford D60

Includes both pinion bearings (with races) and both carrier bearings (with races)

Cost effective option over a complete master overhaul kit if you aren't re-gearing the axle and don't need new shims

For a complete install, you'll want inner axle seals and our yoke install kit

Timken
$156
-

D60 Master overhaul kit

Includes both pinion bearings (with races) and both carrier bearings (with races), shims, ring gear bolts, pinion seal and nut, gear marking paint and a differential cover gasket

US Standard (Koyo bearings)
-
Call us
-

D60 Master overhaul kit

Includes both pinion bearings (with races) and both carrier bearings (with races), shims, ring gear bolts, pinion seal and nut, gear marking paint and a differential cover gasket

Yukon
(Timken bearings)
-
Call us


  Part Number Description Price  
5-733X Dana 60 Greasable Axle Shaft U-Joint, Spicer $69/ea Buy Now
5-806X Dana 60 Non-Greasable Axle Shaft U-Joint, Spicer $54/ea Buy Now
GU5114 Dana 60 inner axle seals.  Not the cheesy seals from the parts store that don't have the bells to guide the shaft in, these are the right part for the job. $9/each Buy Now
- Dana 60 yoke install kit, new pinion nut, washer and seal. $15 Buy Now
GU5115

 

D60 Stub shaft dust shield.  A common part that gets damaged, rusty or left out and it's very important that they are re-installed because it is what keeps water/dirt out of the spindle and wheel bearings as the spindle seal rides on this dust shield. 

$5/each

Buy Now

 

D060 Rubber coated steel core gaskets with an elastomer bead to insure a leak free seal

No silicone required

Premium diff cover gasket.

$25 Buy Now

 

Wheel Hubs and Locking Hubs Part Number Description Application Notes Price  
GU5130 GM Single Rear Wheel hubs:
-used to convert from dual wheel hubs to single wheel on GM and Dodge

-All parts interchange between SRW and DRW hubs, the rotors must be drilled slightly larger to accept a press fit wheel stud.

Brand new GM single wheel hub assembly, includes hub, rotor, and studs.

US made forging.
 
All GM D60

Does not fit Ford D60

Does not fit Dodge D60, the hub works on a Dodge spindle but the rotor is different, see hub below

$323/each Buy Now
GU5129 GM single wheel 8 lug wheel bearing hub.
US made forging.
All GM D60

'91-93 Dodge D60, internal style only

Does not fit Ford D60

Fits external style Dodge D60 with swap to internal style locking hubs or drive flanges

Does not fit Ford D60

$255/each Buy Now
38826 Warn Premium 30 spline locking hubs All GM D60

'91-93 Dodge D60, internal style only

'97 and older Ford D60

Does not fit Dodge external hubs

GM full time hubs require machine work on hubs

$249/pair Buy Now

Choose the category you would like more information on.

Doubler™ Dual Transfer Case
Swaybar Correction/Disconnect™ Kit
Shackle Flip™ Kit for ‘67-up GM trucks
Bolt-In Steering Box Brace Kit
1" Body Lift Kit
Competition Style Motor Mounts
Heavy Duty Front Shackles
Chrome Moly Front Axle Shafts
Drivetrain Upgrades
Blazer Soft Tops
 

Greasable Rear Suspension Bushings
Swaybar Bushing Kits
Body Mounts
Transfer case mounts
Front Upper Shackle Bushing Kit
Spring Bushings
Competition Style Bumpstops
Bushing Assemblies
Tuff Country Suspension
Coming Soon...