970-945-7777

  

 

 


Front U-Bolt Kits

Most of our u-bolts are built specifically for us, we do that to make them as versatile as possible.  Basically they're extra long with lots of thread so that they fit pretty much anything.

Front U-Bolt Kits
Front U-Bolt Plates

Front U-Bolt Kits Part Number Description Notes Price  
GU37051 GM Dana 60 Front U-Bolt Kit Includes (1) 4" x 10-1/2" u-bolt, (2) 3-1/8" x 10" u-bolts and (2) 5/8" studs, includes washers and tall nuts. 

Silver zinc plated, round, with 6" of thread, 5/8" diameter

An ORD exclusive!  These aren't the cheap studs like other kits, ours are threaded all the way down and this kit works with very thin and thick spring packs (and our zero rates are typically no problem either).

$48/kit Buy Now
GU37051-S

Studs only for GM D60, serving as the "fourth" u-bolt

Does not fit Dodge D60

One inch of 5/8"-11 thread, going into the housing

4-1/4" of 5/8"-18 thread

5-3/4" overall length

Includes a pair of studs with washers/tall nuts

$18/set
DU37055 Kingpin Dodge Dana 60 Front U-Bolt Kit Includes (1) 4" x 10-1/2" u-bolt, (2) 3-1/8" x 10" u-bolts and (4) 9/16" bolts, includes washers and tall nuts.

Silver zinc plated, round, with 6" of thread, 5/8" diameter

$48 Buy Now
FU37056 1991 and Older Kingpin Ford Dana 60 Front U-Bolt Kit Includes (1) 4" x 10-1/2" u-bolt, (3) 3-1/8" x 10" u-bolts, includes washers and tall nuts. 

Silver zinc plated, round, with 6" of thread, 5/8" diameter

The webbing in the cast iron housing has to be notched to fit round u-bolts, like these, with the nuts on top.  These require the use of our u-bolt plates as well, click here for more info.

$48 Buy Now
  Part Number Description Notes Price  
17703-ORD '73-87 ('91) GM 1/2 Ton and 3/4 Ton Front (Dana 44 or Corporate 10 Bolt) U-Bolt Kit Includes (1) 3-3/8" x 11" u-bolt and (3) 3" x 10-1/2" u-bolts, includes washers and tall nuts. 

Silver zinc plated, round, with 6" of thread, 5/8" diameter

These are typically long enough for use with our zero rates as well, as always, measure twice and buy once!

$45 Buy Now
17000-ORD '67-72 GM 1/2 Ton and 3/4 Ton Front (Dana 44) U-Bolt Kit Includes (1) 3-3/8" x 11" u-bolt and (3) 2-3/4" x 10" u-bolts, includes washers and tall nuts. 

Silver zinc plated, round, with 6" of thread, 5/8" diameter

This kit is for early GM Dana 44's with 2-3/4" axle tubes

These are typically long enough for use with our zero rates as well, as always, measure twice and buy once!

$45 Buy Now
FU37057 '77-'79 Ford Dana 44 U-Bolt Kit Includes (1) 3-5/8" x 9" u-bolt and (3) 3" x 10-1/2" u-bolts, includes washers and tall nuts

Silver zinc plated, round, with 3" of thread, 5/8" diameter

For stock springs or aftermarket (lift kit type) springs, there is not enough thread for our zero rates

The webbing in the cast iron housing has to be notched to fit round u-bolts, like these, with the nuts on top.

Doesn't work with stock u-bolt plates, must use ORD u-bolt plates, click here

$48 Buy Now
FU37058 '77-'79 Ford Dana 44 U-Bolt Kit Includes (1) 3-5/8" x 10" u-bolt and (3) 3" x 10-1/2" u-bolts, includes washers and tall nuts

Silver zinc plated, round, with 3" of thread, 5/8" diameter

For thicker spring packs and ORD custom springs

The webbing in the cast iron housing has to be notched to fit round u-bolts, like these, with the nuts on top.

Doesn't work with stock u-bolt plates, must use ORD u-bolt plates, click here

$48 Buy Now

 

Front U-Bolt Plates Part Number Description Price  

GU37052 GM Dana 60 front u-bolt plates

5/8" steel plate

For 2-1/2" wide springs
 

$49/pair Buy Now

GU37052-Mts GM Dana 60 front u-bolt plates

5/8" steel plate

For 2-1/2" wide springs

With provision for '73-87 Chevy factory sway bar  
 

$80/pair Buy Now
DU37054 Dodge Dana 60 U-Bolt Plates

5/8" Steel Plate

For 2-1/2" wide springs

$49/pair Buy Now
Front U-Bolt Plates Part Number Description Price  
FU37053 1997 and older front Ford Dana 60 U-bolt plates

5/8" steel plate

Requires the housing to be notched

For 2-1/2" wide springs
 

$49/pair Buy Now
FU37054 1997 and older front Ford Dana 60 U-bolt plates

5/8" steel plate

Requires the housing to be notched

For 3" wide springs
 

$49/pair Buy Now

FU37059 '79 and older Ford Dana 44 u-bolt plates

5/8" steel plate

Requires aftermarket round u-bolt kit, see those by clicking here

For 2-1/2" wide springs

$49/pair Buy Now
GU5216

GM D44 and Corporate 10 Bolt U-bolt plates

Fits '73 and newer axles with 3" axle tube, does not fit '72 and older GM D44 with 2-3/4" axle tubes

5/8" steel plate

For 2-1/2" wide springs

$49/pair

Choose the category you would like more information on.

Doubler™ Dual Transfer Case
Swaybar Correction/Disconnect™ Kit
Shackle Flip™ Kit for ‘67-up GM trucks
Bolt-In Steering Box Brace Kit
1" Body Lift Kit
Competition Style Motor Mounts
Heavy Duty Front Shackles
Chrome Moly Front Axle Shafts
Drivetrain Upgrades
Blazer Soft Tops
 

Greasable Rear Suspension Bushings
Swaybar Bushing Kits
Body Mounts
Transfer case mounts
Front Upper Shackle Bushing Kit
Spring Bushings
Competition Style Bumpstops
Bushing Assemblies
Tuff Country Suspension
Coming Soon...