HD Front Shackles with Dodge Dana 60 Swap Kit for 67-87 Chevy For Most Aftermarket Springs - Greasable Polyurethane Bushings
HD front shackles with Dodge Dana 60 swap kit for '67-87 ('91) Chevy, for aftermarket springs other than Superlift/Skyjacker Includes HD shackles, greasable bolts/polyurethane bushings/sleeves/spacers for both sides of the truck.
Greasable front spring eye bushing kit and HD shackles for '67-87 K10/K20 pickup, '69-91 Blazer, '67-91 Suburban and '76-91 K30/V30 pickup. For aftermarket 2-1/2" wide (lifted) springs.
Includes bushings/sleeves/greasable bolts for both ends of both front springs plus ORD HD greasable shackles and the bushings/sleeve/bolts for the shackle hanger. For 1-1/2" eyelet at front of front spring, 1-1/8" eyelet at back of front spring. Fits all aftermarket springs except Superlift and Skyjacker.
'93 and older Dodge Dana 60's, have spring pads that are 1/2" wider than GM solid axles, this special bushing kit offset the springs to make everything line up.
Uses larger 1/2" bolt at the back, this will require ORD HD front shackles plates or drilling stock shackles for larger bolt.
For install the thick washer and thick shoulder bushing always face the motor. This helps offsetting to the wider dodge d60 perch.
(4) 4.5" Shackle Plates
(2) ORDB8002 Polyurethane Bushing Halves
(2) ORDB7005 Polyurethane Bushing Halves Trimmed Down
(2) ORDB7001 Polyurethane Bushing Halves
(2) ORDB7005 Polyurethane Bushing Halves
(4) ORDB7006 Polyurethane Bushing Halves
(2) Large Spacers
(2) Small Spacers
(2) Greaseable DOM Sleeve 3.5" Long for 9/16" Bolt
(2) Greaseable High Head better than Grade 8 Bolt With Top Lock Nut and larger shank grease zerk 9/16"-12x5"
(4) Greaseable DOM Sleeve 3.5" Long for 1/2" Bolt
(4) Greaseable High Head better than Grade 8 Bolt with Top Lock Nut and larger shank grease zerk 1/2"-13x5"
(6) Hardened Washers
