Kevlar Main Eye Spring Bushing Kit for Stock Front Springs, '67-87 (91) GM Trucks, Greasable

Includes bushing/sleeve/bolt/washers/lock nut for both front eyes of both front springs, all greaseable.

Stock (OE, not lifted) front springs have a 1-1/2" eye at the front. If you're unsure whether your springs are stock or not, an easy ID point is the width; stock front springs are 3-1/8" side.

Aftermarket lifted springs (other than Superlift and Skyjacker) use a 1-1/2" eye at the front. If you're unsure whether your springs are stock or not, an easy ID point is the width; aftermarket (lift) springs are 2-1/2" wide.

Superlift and Skyjacker springs use a 1-1/8" eye at the front and are 2-1/2" wide.

We've implemented new Kevlar infused polyurethane bushings into our entire lineup, any of our products with suspension bushings in them will now have the best bushings available!

Infusing Kevlar into polyurethane doubles the tensile strength, tear resistance, and increases the life of the part by cross linking the polyurethane. We elected to keep the same durometer (stiffness) so as not to inhibit suspension travel, as well as keeping the black color everyone is used to. Basically with double the tensile strength, the bushing can be pushed harder and still come back to it's original shape. All of that means using your truck more and maintaining it less, and reduces the cost of replacing bushings!

Due to its wide range of elastomeric properties and strength factors, Kevlar Infused polyurethane out handles, out preforms, and outlasts other similar polyurethane materials on the market.

We also added chamfers to make bushing install easier!