GM NP241 Slip Yoke Eliminator Kit
For us with the NP241 Slip Yoke Eliminator Kit, the yoke must be shortened 1/4". You can find the labor to machine the yoke and all the yokes down below on this page. If you would like us to shorten the yoke for use with the SYE kit then please add the yoke and labor to your order. Thanks!
NP241's are a common GM transfer case used in 1989 and newer GM trucks. Their main downfall is the slip yoke rear output which is not desirable on lifted trucks.
This kit converts your GM NP241 to a bolt on (fixed style) yoke. Uses common 32 spline yokes (same as NP205), though the yokes needed to be shortened 1/4".
Includes new fixed yoke style main shaft, bearing/seal retainer w/seal, spacer, bolts for retainer and nut for yoke.
You will need to shorten the yoke .25" for use with our SYE. The option to do that can be found below (Click descritption text to go to yoke page):
| Icon | Label | Description | Type | Size | Download |
|---|---|---|---|---|---|
|
NP241 Slip Yoke Eliminator Instructions | 769.2 KB | Download |
